While others say "NO" to special sizes, we say "YES"!

Our "no upcharge" true custom sizing feature is the key. You will find that most "so called" custom cabinetry is available only in 3" width increments and 6" height increments. This can be a real problem when trying to remodel an older home with non standard ceilings heights or unusual wall configurations. You wind up using the closest stock size cabinet you can find and then stick unsightly filler strips and wide moldings in place to cover the gaps. Not so with us. All of our cabinet sizes can be modified to any width, height or depth to provide you with the custom fit you want. Need a wall cabinet that is 14 3/8" wide and 35 1/4" tall. No problem. Because all of our cabinetry is custom built to order, we can take our next largest standard size( a 15" wide by 36" tall) and build it to your exact size at no upcharge.

Our cabinets exceed every quality industry benchmark.  Read Consumer Reports article on what to look for in a kitchen cabinet, then review our minimum specs below.

Drawers
                    
Our cabinets are 5/8" thick solid stock, with English dovetail joinery with a plywood bottom that fits grooves on four sides. There are no staples or particle board.
                    
Drawer Hardare
                    
Our drawer hardware has a concealed undermount double-roller design. The Premiumline offers full-extension soft-close.
                    
Doors
                    
Ours are made from hand selected, high grade lumber with 5/8" thick solid panels. Our raised panel doors feature a broad selection of options for unlimited design possibilities.
                    
Cabinet Box
                    
The front frame is 3/4" x 1/2" solid stock with dowel joints for maximum ssquareness and strength, machined to receive ends.
                    
The A-Cabinet Ends are 1/2" veneered plywood. They have finished exposed ends, veneered in teh wood species ordered. Machined to enter grooves in front frame and to receive cabinet back, top and bottom. All finished ends are flush with the front frame.
                    
The tops and bottoms are 1/2" veneered plywood with 3/4" solid support blocks attached to the tops and bottoms, which adds to the rigidity of construction and insures the squareness of each unit.
                    
The backs are 1/4" veneered fibercore.
                    
Shelves
                    
Shelves are 3/4" veneered fibercore plywood with surgace metal standard in wall cabinets (peg holes available upon request at no upcharge) and fixed shelves in the base cabinets.